| 發表文章 | 發起投票 |
買充電池
本貼文共有 11 個回覆
此貼文已鎖，將不接受回覆
eneloop?
eneloop?
未試過...
eneloop有無其他好介紹？
有無其他好介紹？
eneloop 係最好
日本sanyo 出產
基本上係全球no.1
不過留意voltage 岩唔岩
有無其他好介紹？
eneloop 係最好
日本sanyo 出產
基本上係全球no.1
不過留意voltage 岩唔岩
Sony,Panasonic都可以考慮嗎?
有無其他好介紹？
eneloop 係最好
日本sanyo 出產
基本上係全球no.1
不過留意voltage 岩唔岩
Sony,Panasonic都可以考慮嗎?
panasonic收購左sanyo
兩間依家一樣的
sony未用過
如果平過eneloop好多的話，我會買sony
有無其他好介紹？
eneloop 係最好
日本sanyo 出產
基本上係全球no.1
不過留意voltage 岩唔岩
Sony,Panasonic都可以考慮嗎?
panasonic收購左sanyo
兩間依家一樣的
sony未用過
如果平過eneloop好多的話，我會買sony
yes
有無其他好介紹？
eneloop 係最好
日本sanyo 出產
基本上係全球no.1
不過留意voltage 岩唔岩
Sony,Panasonic都可以考慮嗎?
panasonic收購左sanyo
兩間依家一樣的
sony未用過
如果平過eneloop好多的話，我會買sony
電我會買返eneloop
但叉機我買sony![[sosad]](/face/hkg/sosad.gif)
叉機我睇電流同產地
日本野就ok, 我就買左三菱
我揀細電流 100mA
關於叉機既選擇
The cheapest way to charge a nickel metal hydride battery is to charge at C/10 or below (10% of the rated capacity per hour). So a 100 mAH battery would be charged at 10 mA for 15 hours. This method does not require an end-of-charge sensor and ensures a full charge. Modern cells have an oxygen recycling catalyst which prevents damage to the battery on overcharge, but this recycling cannot keep up if the charge rate is over C/10.
The cheapest way to charge a nickel metal hydride battery is to charge at C/10 or below (10% of the rated capacity per hour). So a 100 mAH battery would be charged at 10 mA for 15 hours. This method does not require an end-of-charge sensor and ensures a full charge. Modern cells have an oxygen recycling catalyst which prevents damage to the battery on overcharge, but this recycling cannot keep up if the charge rate is over C/10.
| 發表 |